About Us | Contact Us

Your outdated remote control or camera may have battery corrosion. Here’s how to wash it.

Have you ever gone to use a long-unused mouse, camera, or remote control only to discover the batteries and their container covered in a crusty, white-colored buildup? Battery corrosion is the cause of that crust. Batteries will continue to slowly drain if they are kept in a device for a long period, and a buildup of gas will eventually leak out as battery acid.

Your electronics don’t have to be destroyed by corrosion, though. You should be able to remove the corrosion and get those forgotten devices back to work with a few common household products.

How to use vinegar to remove battery acid

You should put on gloves first because the acid can be corrosive.
Remove the batteries next.
Carefully remove any corrosion debris from the device using a cotton swab, being careful not to get any on your skin or in your eyes.
After that, use a cotton swab that has been moistened with a small amount of white vinegar or lemon juice to clean the device’s parts. It may make a very little sizzling sound, which indicates that it is functioning.
Use a dry cotton swab to wipe away any remaining moisture.
Before installing fresh batteries, let the device’s battery compartment thoroughly dry out in the open.

preventing rust in batteries

Remove batteries from equipment that you might not use for a time in order to prevent corrosion. Devices should be kept dry and cool to prevent the batteries from corroding too soon. Also, stay away from old batteries.

Does corrosion harm electrical components?
Corrosion can harm your electronics to the point that they can no longer be used, even if in many circumstances it can be cleaned away and your electronics can still be utilised.

Leave a Comment